What is a Top Plate?

Article Details
  • Written By: Mary McMahon
  • Edited By: O. Wallace
  • Last Modified Date: 26 September 2019
  • Copyright Protected:
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
As President of Uruguay, José Mujica refused to live in the presidential mansion and gave away 90% of his salary.  more...

October 16 ,  1964 :  China became the fifth country in the world to successfully detonate a nuclear bomb.  more...

In wood frame construction, the top plate is the horizontal framing which runs along the top of the joists. Depending on when a building was constructed, it may have a single or double top plate, with the double version being the modern industry standard. This particular aspect of frame construction is critical to the integrity of the building, providing support to joists for additional floors, along with beams and rafters in the roof.

If a house is stripped down to the framing, the top plate will be readily visible at the top of the studs on each floor of the building. If the stripped building has multiple stories, the top plate can be seen supporting the framework of the joists, while the framing on the uppermost story will provide support to the rafters of the roof. As the house is finished, the top plate will be covered with siding and interior walls, becoming invisible to the eye.

Like all of the framing in a house, the top plate is vulnerable to an assortment of problems. If wood which has not been properly cured is used, the beams may bend, bow, or twist, pulling the house out of alignment and causing structural instability. Thinner beams may be prone to breakage or weakening which could cause the floor or roofline to sag, contributing to structural problems, and the top plate can also be eaten away by rot, insect infestation, or heavy mold and mildew.


Framed houses are routinely inspected once they have been framed to confirm that all of the framing is in good shape. A deformed top plate or a beam with noticeable problems such as large knotholes should be removed and replaced so that it does not cause problems in the future. Reputable contractors should be using wood which has been thoroughly cured, and the wood may need to be treated so that it will resist rot and insects.

When inspecting a home which has already been built, it can be challenging to identify problems with the framing, because the framing is not visible from the outside. A structural engineer can sometimes inspect a home and identify problems such as a deformed roof line or sagging floor which could signal issues with the framing, and inspections of this type are highly advised when making the decision to purchase a structure, so that critical flaws can be discovered before all of the paperwork has been signed.


You might also Like


Discuss this Article

Post 2

@backdraft - I know what you mean. I recently had the hardwood floors replaced in my house and this involved ripping up the old floors to reveal the joists and beams underneath.

You walk on them everyday, but you never really think about what is holding up the floor of your house. You are pretty sure that you won't go crashing into the basement but you are never sure exactly sure why (or at least I wasn't).

The details of home construction are fascinating. I wish I knew more about it. Maybe one day if I have enough time and money I will build a home myself. It will probably blow over in the first strong wind but it would be fun anyway.

Post 1

I live close to subdivision that was recently constructed and it was a fascinating process to watch them frame and then finish the houses. It is a process as strange and transformative as seeing a skeleton and then seeing a living human being. There is a huge disconnect between the way something looks and the internal structure that is giving it form and function

Post your comments

Post Anonymously


forgot password?