What Is a BC547 Transistor?

Article Details
  • Written By: Geisha A. Legazpi
  • Edited By: Allegra J. Lingo
  • Last Modified Date: 09 August 2018
  • Copyright Protected:
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Former LA Lakers star Kobe Bryant was the first NBA player to win an Oscar, for the short film ‚ÄúDear Basketball."  more...

August 16 ,  1987 :  An airliner crashed onto a highway in Detroit; the only survivor was one 4-year-old passenger.  more...

A BC547 transistor is a negative-positive-negative (NPN) transistor that is used for many purposes. Together with other electronic components, such as resistors, coils, and capacitors, it can be used as the active component for switches and amplifiers. Like all other NPN transistors, this type has an emitter terminal, a base or control terminal, and a collector terminal. In a typical configuration, the current flowing from the base to the emitter controls the collector current. A short vertical line, which is the base, can indicate the transistor schematic for an NPN transistor, and the emitter, which is a diagonal line connecting to the base, is an arrowhead pointing away from the base.

There are various types of transistors, and the BC547 is a bipolar junction transistor (BJT). There are also transistors that have one junction, such as the junction field-effect transistor, or no junctions at all, such as the metal oxide field-effect transistor (MOSFET). During the design and manufacture of transistors, the characteristics can be predefined and achieved. The negative (N)-type material inside an NPN transistor has an excess of electrons, while the positive (P)-type material has a lack of electrons, both due to a contamination process called doping.


The BC547 transistor comes in one package. When several are placed in a single package, it is usually referred to as a transistor array. Arrays are commonly used in digital switching. Eight transistors may be placed in one package to make layout much easier, for example.

To make use of a transistor as an audio preamplifier, a direct current (DC) source is needed, such as a 12-volt (V) power supply. In a common emitter configuration, the negative side of the power supply is alternating current (AC)-coupled to the emitter via a capacitor. There is also a small resistance connecting the power supply to the emitter. The power supply is then connected to the collector via a resistor, which may be referred to as a limiting resistor. When the collector-to-emitter current flows, there will be a voltage drop in the limiting resistor, and in the idle state, the collector voltage is typically 6 V.

Transistor circuit design requires a thorough understanding of current-voltage ratings of various components, such as transistors and resistors. One goal is to keep the components from burning up, while another is to make the circuit work. Saving electricity is also important, such as in the case of battery-operated devices.


You might also Like


Discuss this Article

Post 3

Are the CTBC547Bjs and BC547 Transistors the same?

Post 2
@clintflint - It's not really that difficult if you learn the rules. I think kids in school get confused because of all the theory they make you learn, and that's great for people who can understand the theory, but not so good for the people who can't.

Electricity is fairly predictable though, so it's pretty easy to pick up the basics. If you're interested in doing projects you should start with a kit set, like making a transistor radio.

Eventually you realize it's just like playing with legos. You just have to put the right piece in the right slot and everything will work.

You do need to be careful though. Make absolutely sure you do understand safety rules for electronics, like keeping your work space dry and never working on anything that you've connected to the power.

Good luck, I'm sure you'll be making demonic teddy bears yourself before long.

Post 1

I've always wished that I was better able to understand electronics, because I'm pretty creative and I feel like it would open up a whole new world of artistic possibilities.

For example, I met a guy a few years ago who was trying to buy transistors so that he could set up an art exhibit where he had cute toys like teddy bears doing somewhat grotesque things, like spinning their heads around when someone approached.

But when we studied electricity in high school I can remember it being all a big mystery to me, transistors and all.

Post your comments

Post Anonymously


forgot password?