What are Toolbox Talks?

Article Details
  • Written By: Mary McMahon
  • Edited By: Bronwyn Harris
  • Last Modified Date: 01 December 2018
  • Copyright Protected:
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
In 2018, Americans consumed a record amount of meat, averaging 222 lbs (101 kg) of red meat and poultry per person.  more...

December 12 ,  1901 :  The first transatlantic radio signal was sent and received.  more...

Toolbox talks are safety lectures aimed at the construction trade. The lectures are intended to educate workers about creating and maintaining safer work conditions, and attendance is mandatory in many companies. In addition to the construction industry, mining companies and heavy manufacturers also hold these talks. Many companies provide them in modular form, so that a safety educator has a curriculum readily available.

There are several facets to successful and useful toolbox talks. As a general rule, the talks are short, and they are kept interesting and relevant. Some workplaces hold brief lectures once a week, continuously educating their employees, while others have longer safety seminars at less frequent intervals. The goal is to empower employees so that they can recognize, avoid, report, and correct safety hazards.

Learning to recognize safety hazards is an important part of the curriculum. Workers are educated about all aspects of the industry they work on, so that they can identify problems with their work sites. Usually, workers are invited to tell stories about injuries they have witnessed or heard about, so that they can learn from each other as well as the lecture. Electrical safety, proper handling of equipment, and fall safety are common safety hazards that are covered.


Workers are also taught about how to correct safety hazards. Most job sites have a safety officer, and employees are told to report hazards to this person. Once the officer has evaluated the hazard, actions can be taken to correct it. Workers are also encouraged to use common sense. For example, if a hazard is obviously immediately life threatening, workers should evacuate the area or take steps to correct it, rather than going through the safety officer.

Avoiding potentially hazardous situations is included in toolbox talks as well. For example, workers are taught to tie in when working in high spaces, shown how to use a respirator in conditions with large particulate loads, and educated about the impact of environmental conditions, such as extreme heat or cold, on safety. Learning to avoid the creation of unsafe conditions is also important, and workers learn how to work and move safely around a job site.

Some workplaces also include information about worker rights in the talks. These rights include legal protections for workers who report unsafe working conditions to government organizations and the right to disability compensation for workers who are injured on the job. The primary focus, however, is safety. Most employers want their employees to be healthy and safe for a number of reasons, both pragmatic and empathetic.


You might also Like


Discuss this Article

Post 3

@bbpuff - I agree with both you and empanadas. I think safety issues should be addressed in any job or situation and most safety issues are a result of a lack of common sense, sadly. Just use your head!

Post 2

@empanadas - I agree that safety toolbox talks are a great thing that should be implemented across the board. In many instances, construction safety meetings are quite common. Sadly, in other cases, toolbox talks don't come around as often as they should. I used to work for a company that never had them, however this new place I work for has them all the time. It's important to understand proper safety when you're faced with life threatening situations literally everyday. Even using power tools is dangerous, think about it!

Post 1

Toolbox talks are a great way to get safety topics discussed with your contractors; especially if you're a General Contractor with lots of subcontractors. Most companies have safety meeting topics that they cover every week or month and I think it's a good thing to implement all across the working class board.

Post your comments

Post Anonymously


forgot password?