Vacuum cleaners remove dust, dirt, and debris to speed up the cleaning process at home and in the workplace. Over time, many vacuums suffer from a loss of suction, resulting in reduced cleaning power. This lack of suction can be caused by a simple clog or by poor maintenance and care. By performing basic repairs as well as routine maintenance, users can increase vacuum cleaner suction, resulting in faster, easier cleanup.
One of the easiest ways to increase vacuum cleaner suction is to replace or empty the dust collection bag. As the collection bag fills, less air is able to pass through, which reduces suction power and pressure. By emptying or replacing this bag, users will enjoy a natural improvement in suction power. The same principle applies to canister vacuum cleaners. When the canister is empty, a greater volume of air can flow through to maximize cleaning power.
The filter on a vacuum cleaner must be cleaned or replaced frequently to avoid a loss of suction. Some models feature removable filters that can be cleaned by passing them under water or simply brushing them off. Others require replacement rather than cleaning. Adding new or cleaned filter is a sure way to increase the suction of a vacuum cleaner.
Upright models often utilize a rubber belt to rotate the beater brushes and collect dirt. Over time, this belt can wear or break, reducing suction power and leaving the vacuum unable to clean effectively. Users should check this belt and replace it as needed to maximize cleaning power. In some instances, simply turning the belt inside out can help the vacuum clean effectively for an extended period until a new belt can be found.
If the beater bar becomes clogged, it may stop rotating entirely, which can lead to a loss of suction. To improve vacuum cleaner suction in this type of scenario, remove the cover over the beater bars and clean them to restore power. Cut out trapped hair or other objects with scissors or a utility knife, then reinstall the cover. Always make sure the vacuum is unplugged before attempting this procedure.
Clogs or obstructions in a vacuum hose can also lead to poor suction. To increase vacuum cleaner suction, remove all hoses and attachments from the units. Pull out any objects lodged inside, as well as items or debris visible in the vacuum. Reattach all hoses and attachments to enjoy improved suction and cleaning power.