How can I Turn my Home Movies into DVDs?

Article Details
  • Written By: C. Harper
  • Edited By: Lucy Oppenheimer
  • Last Modified Date: 15 August 2019
  • Copyright Protected:
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Paleontologists think a dinosaur skeleton known as "Scotty" could be the largest T. rex specimen ever discovered.  more...

August 23 ,  1927 :  American anarchists, Vanzetti and Sacco were executed for murder.  more...

There are many possible paths to take when converting home movies to DVD, but in the end, the process will follow one of two directions: you can burn, or copy, your home movies to DVD with a stand-alone DVD recorder, or you can burn them by transferring them to a computer and writing the DVDs with a computer DVD burner.

The simplest and most direct method is by connecting your movies directly to a stand-alone DVD recorder to burn them. To convert from VHS, you can simply connect a standard VCR to a stand-alone DVD recorder and record your home videos in real time. Remember that there are simple devices to convert smaller tape formats such as VHS-C to VHS by simply placing the smaller tape into a larger tape that will play in a standard VCR.

It is also possible to get a combination VHS and DVD recorder which can convert VHS to DVD with a single device. This could be very efficient if the majority of your home movies are in VHS format. You can also find a stand-alone DVD recorder with FireWire ports if your home video camera supports FireWire. This will allow you to record directly from your home video camera to DVD.


The advantages of converting your movies using the stand-alone DVD recorder are efficiency and speed with generally good quality conversion. The disadvantages are the limited ability to edit and the need for new hardware.

If you choose to transfer your home movies to a computer, you will have a great deal of flexibility for editing your videos. If your home movies are already saved on a digital video camera, this process is relatively simple: you will need to capture your movies with a video editing program, edit it if you wish, and convert it to mpeg-2 to burn to DVD. This is a much more time consuming process than recording directly to a stand-alone DVD recorder.

If you want to transfer your movies from an analog format to edit on a computer, you will need to get an analog-to-DV or analog-to-mpeg2 hardware device or use a digital video camera that functions as one. If you get a device that converts directly to mpeg2, you will not be able to add any fancy transitions to your video, and your editing abilities will be mostly reduced to cuts. However, the video will be ready to burn as soon as it arrives on your computer, and the whole process will be much faster.

The advantages of transferring your home movies to a computer before burning are increased flexibility in editing, and the possibility of not needing to buy any additional hardware. You'll have to decide which method is best suited for you depending your individual needs.


You might also Like


Discuss this Article

Post 4

@Kamchatka - Home movies software is really easy to come by and, yes, in many cases it often comes with your Operating System or even on the free trial basis referred to earlier.

While Windows Movie Maker might be helpful for home videos, the first person of this discussion was asking about VHS to DVD. I think in most cases you would have to rip the VHS or copy it onto your desktop or hard drive. I am not sure why you would wish to edit the VHS file as it's pretty straightforward... unless you are thinking of editing out previews...? At any rate, you must first rip and then sometimes convert to be able to copy onto a DVD.

Post 3

@babyksay - I think your suggestion makes a lot of sense. It is always wise to see what other people's input might be. Creating home movies is fun, but editing them and working with software you are otherwise unfamiliar with can be a real pain. I know that you are not familiar with Mac's let alone with what the first commenter was trying to do, but your advice is very applicable.

Other than that, I think you might have to rip the movie first...? I know you have to do that with DVDs for sure, so you would need ripping software. For home movies it's as simple as having a cable to connect to your PC pretty much.

Post 2

@anon16507 - You should probably do a search on Google in order to find the appropriate editing software. I know that Windows has Windows Movie Maker which will let you edit ametuer home movies no problem, but as for professional movies from VHS to DVD I really couldn't say how that would work. Aside from that, I don't know much about Mac's either. Sorry, I know that's not a lot of helpful things there, but doing a search is often the answer that I find is the simplest. Many companies will give you a free sample or have a 30 day trial offer you could utilize. Good luck!

Post 1

Thanks for this useful post. I am converting old VHS tapes to DVD using a recorder. I am able to play this DVD on players and my computers but I am unable to edit it. Is there a way to edit these files (say using iMovie using a mac or a PC)? Thanks in advance...

Post your comments

Post Anonymously


forgot password?