Category:

What Is Threshold Voltage?

Transistors are often used to monitor for threshold voltage in a device.
Article Details
• Written By: Keith Koons
• Edited By: Lauren Fritsky
• Last Modified Date: 28 May 2015
• Copyright Protected:
2003-2015
Conjecture Corporation
• Print this Article
Free Widgets for your Site/Blog
 Hans-Gunnar Liljenwall was banned from the 1968 Olympics for drug abuse for drinking two beers before competition.  more...

 June 29 ,  2007 :  The first Apple iPhones were sold.  more...
wiseGEEK Slideshows

Threshold voltage is the point at which an electrical device is set to activate any one of its operations. This normally occurs within a transistor that continually monitors the power source for changes, ignoring those that are faint or inadvertently leaked through the system. Once the charge of incoming electricity is sufficient to meet the preset standard, the threshold voltage is met and power is allowed to flow throughout the device in order to enable it. Anything below the predefined threshold is contained and treated as a phantom charge.

Although determining the threshold voltage in a device with a single circuit may seem relatively simple and straightforward, modern electronics require a fairly complex mathematical formula to set and regulate the various thresholds. An appliance like a dishwasher, for example, may be programmed to complete 20 or more functions dependent on the user’s everyday requirements, and each separate phase that it enters is activated by an electrical charge. These subtle changes in power allow the device to know when to add more water, when to activate the drying mechanism, or how quickly to rotate the cleaning jets. Each of these activities is set to a separate threshold voltage, so when a number of elements needs to be activated at once, it requires a great deal of planning to ensure proper operation. The equation for calculating threshold voltage is the sum of the static voltage, plus twice the bulk potential and the voltage across the oxide.

Ad

A threshold voltage is normally constructed with a thin inversion layer that separates the insulating and the actual body of a transistor. Tiny holes that are positively-charged cover the surface of this region, and when electricity is applied, the particles within these voids are repelled. Once the current within both the inner and outer regions is equalized, the transponder allows a release of the energy to complete the circuit that activates the process. This entire process is completed within milliseconds, and the transistor constantly rechecks to ensure that the flowing current is justified, sapping the power once it is not.

Another term that is used when talking about transponders is metal oxide semiconductor field effect transistor (MOSFET) threshold voltage. These conductive switches are designed with either positive or negative charges much like in the above example, and they are the most common type of transistor within analog or digital devices. MOSFET transistors were originally proposed in 1925 and constructed in aluminum up until the 1970s, when silicon was discovered as a more viable alternative.

Ad

Discuss this Article

 miriam98 Post 2 @everetra - It’s quite surprising to learn how the washing machine is tripped by the threshold voltage. I always thought that it used a timer mechanism of some sort to know when to change different phases or cycles. Since it’s dependent on slight voltage variations and not a timer however, I suppose it could malfunction if anything happened that threw the voltage off by even a little bit. An electrical spike across the line might do that. It might be wise to have some voltage protection for your appliance in that case too. everetra Post 1 I would suspect that threshold voltage is used in the utility industry to trip a relay or a circuit breaker when there is a power surge. I don’t know too much about the technical details myself, but our company does sell products to the electrical utilities, so I know a little. When a voltage above a certain level – I assume this is the threshold voltage – comes across a line, the relay trips and it stops the circuit from continuing. Or it may let a little voltage through, I don’t know exactly. But the point is that it acts like a surge protector, and this mechanism prevents catastrophes from happening, like the whole substation from blowing up.

Login

 username password forgot password?

Register

 username password confirm email