Category: 

What is the Heat Island Effect?

Article Details
  • Written By: Brendan McGuigan
  • Edited By: C. Wilborn
  • Last Modified Date: 28 October 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
The Argentinian resort town of EpecuĂ©n was submerged by flooding for years; it is now populated by one elderly man.  more...

December 5 ,  1933 :  Prohibition ended in the US.  more...

The heat island effect, also referred to as the urban heat island effect, is a situation where the average temperature of an area is higher than nearby rural areas. It's mostly caused by the fact that the materials in urban areas, like concrete and asphalt, absorb a lot of sunlight and store it in large thermal masses. A secondary cause is waste heat generated by massive uses of energy. The buildup of heat has an affect not only on the city itself, but also on nearby areas downwind, which generally see between 10% and 30% more annual rainfall than areas upwind.

There are a number of small factors that contribute to the heat island effect, and when combined, they increase average temperatures substantially. The difference in urban temperatures over regional averages is seen most strikingly at night, and especially during the winter. One of the main causes of the increased temperature is that in an urban environment large buildings block out a great deal of the sky, which at night is much cooler than the ground, and so heat does not dissipate as rapidly as it does in rural areas with no large buildings.

Ad

Another cause is the introduction of large swaths of new materials that absorb and retain heat energy from the sun. Asphalt, for example, absorbs much more sunlight than normal earth, because of its dark color, and both asphalt and concrete tend to retain heat much better than an average patch of ground. As a result, sunlight is absorbed as heat into parking lots, sidewalks, and streets, and it takes much longer to dissipate than surrounding non-urban areas.

There are significant health risks associated with a heat island, and depending on the region, mortality rates during heat waves can be substantially increased in urban areas as a result. Already high temperatures can soar even higher as heat is absorbed and trapped in cities, and without a ready outlet to bleed off at night, there can be little respite for those afflicted by the heat. Although there are only around 1,000 deaths each year in the United States from extreme heat, a sizable portion of these are thought to be due to the increased temperatures of urban environments.

Perhaps even more dramatic is the financial cost of the heat island effect. Higher temperatures during summertime mean increased electricity costs to power air conditioning to keep interiors cool. The city of Los Angeles estimates that an extra $100 million US Dollars (USD) is spent each year on climate control due to this phenomenon. As a result, a number of innovative cooling programs have been suggested, both to lower annual costs and to increase standard of living.

Planting trees, which reflect light and cool the environment, using lighter-colored surfaces, planting living roofs, and coating roads with a reflective layer are all commonly-used tactics to reduce the heat island effect. In the city of Los Angeles, one proposed program looks at spending $1 billion USD to coat approximately one-quarter of the roads in the city, plant ten million trees, and refit five million houses. The annual savings are estimated at around $170 million USD in energy, and an additional $360 million USD in healthcare, with the project paying for itself in only two years.

Ad

You might also Like

Recommended

Discuss this Article

Alchemy
Post 3

@ GenevaMech- There are plenty of techniques that can be implemented on multiple levels to mitigate the urban heat island effect. An urban area creates its own microclimate, so the designed and natural environment need to work together in symbiosis to minimize environmental hazards. On the design level, buildings can be designed to use conserve and use energy efficiently. Building emissions are responsible for a lot of the heat cities produce. Designers can also incorporate passive energy systems and more albedo surfaces into the design of buildings. Planners could also incorporate passive energy flow into cities and neighborhoods, using water flow and plant transpiration to cool urban areas.

Policies can also be enacted to reduce the urban heat island effect

. City planners and city councils can approve mixed use zoning, pedestrian and transportation oriented districts, and traffic calming techniques. These will all serve to reduce traffic and create a denser city, addressing two major causes of the urban heat island effect. Cities can also create more parks, surface water, and open spaces to increase natural cooling.
GenevaMech
Post 2

What techniques can cities use to reverse the trend of the urban heat island effect? I am going to college next year, and I am thinking about studying green design and architecture or urban planning. Problems associated with the built environment interest me, and I am trying to learn as much relevant information on the subject as possible before I start school.

aplenty
Post 1

The nighttime temperatures created by the urban heat island effect actually have far more to do with albedo than they do with the size of the buildings surrounding the area. Often the more sprawl in a city, the worse the urban heat island effects. The biggest contributor to the urban heat island effect is the loss of natural spaces and agricultural land around a city to sprawl. Evidence of this lies in the fact that relatively horizontal cities like Los Angeles, Las Vegas, and Phoenix see a higher change in average nighttime temperatures than vertical cities like New York, Chicago, Tokyo, and Hong Kong.

Studies conducted by associate professors at my school have shown that the increase in nighttime temperatures

is directly related to the loss of agricultural land to suburbia. In the last few decades alone, the number of misery days per year (days over 110 degrees) has increased from less than ten to almost thirty a year. These misery days are also lasting later into the summer. In fact, this year the latest misery day on record happened in mid-October.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email