Learn something new every day
More Info... by email
Spend any amount of time working or playing on computers and soon you’ll hear three words bandied about: troubleshooting, testing and debugging. While the first two are common enough, their meanings might seem blurred or even synonymous. In practice each of these actions is different, though related.
Troubleshooting is the bane of the end-user and customer support technician, and begins when software or hardware does not perform as expected, giving an unanticipated or otherwise unsatisfactory result. In many cases user error is at fault.
The first step in troubleshooting is to cover the basics. Is the software or hardware installed properly? Is it configured properly? Have you read the manual and followed all instructions? Maybe you changed something in your system that precipitated the problem? Have you been using this product all along, or is it a new install?
If it’s a new install you can almost be sure that the trouble lies in the installation process, particularly in the case of hardware. Hardware requires a device driver (software file) that acts as a bridge or interface between the hardware and the operating system. If the device driver fails, the hardware cannot communicate properly with other system components. Device drivers might not be present or might have been installed in the wrong order relative to the device.
If the problem lies in hardware that was working perfectly fine up to the present moment, corruption of the device driver might be the cause. Reinstalling the driver might solve the problem. An updated driver might also do the trick. Other times, reseating a component in the motherboard by powering down the computer, extracting the component then reinstalling it takes care of the issue.
Troubleshooting hardware in Windows™ operating systems is also available through the Device Manager and Help menus. A yellow exclamation mark next to a component in the Device Manager indicates a problem.
Software that starts behaving badly might also be corrupted. Reinstallation can sometimes help, but if a program began acting up after new, unrelated software was installed, there might be a conflict between the two. Firewalls and anti-virus programs are notorious for not playing together nicely, and it’s probably wise to stick to just one program in each of these categories unless you are an advanced user.
Troubleshooting in general usually involves reading manuals or help files, going over the basics to eliminate user error as a potential cause, and using a search engine to investigate how others have solved the problem. If there’s one thing you can always count on as an end user, it’s that someone has walked in your shoes before. The Internet community is very good about providing help, and in most cases answers can be found by diligent searching.
Testing is the precursor to debugging. Testing is commonly the forte of programmers and advanced users, and occurs when a product is new or is being updated and needs to be put through its paces to eliminate potential problems. Testing identifies “bugs” or imperfections so that they can be corrected in the debugging process, before the [next] official release of the product. These “unofficial” releases are known as beta releases (e.g. 3.0b), and public volunteers are known as beta testers.
Beta testing is a valuable resource for software developers because of the varied computer systems participating, combined with the sheer number of hours and scenarios under which the program is used. This flushes out unforeseen problems in a way that can’t be effectively achieved using in house debuggers only. The beta testing phase gives authors a good idea of the readiness of a product for the public domain.
Hardware is beta tested as well but since it is financially prohibitive to provide free beta hardware to the public, hardware testing and debugging is commonly done in house. Beta products might, however, be premiered and in some cases distributed in limited numbers to industry insiders at conferences such as COMDEX.
Beta software is specifically made available for testing and is not considered a stable release. Beta testers install beta software at their own risk, and to help software developers identify the source of a problem, they must supply a healthy amount of information when reporting a bug. Required data varies but generally includes system specifications, beta version and build, the exact conditions under which the bug occurred, and error message content.
Debugging is the forte of programmers and developers, and involves fixing the very code of the software to eliminate errors or bugs. Developers attempt to replicate beta-reported bugs on in house systems for the purpose of eliminating them.
While there are many types of debugging tools, a simple example is a tool that allows the programmer to monitor program code while manipulating it to execute various commands and routines. One basic approach is to simplify the code as much as possible at the suspected troubled spot, while still replicating the problem, narrowing the focus to potential problem lines. In reality, debugging is a complex process that requires different approaches based on factors such as the complexity and length of the software code itself, and the language it’s written with.
Debugging can be a tiresome task, though some languages are easier to debug than others. Java, for example, includes routines that handle exception errors. An exception error occurs when the program encounters a situation that must be addressed before the program can continue on properly. In this case a built-in routine initiates a “search” within the various layers of software code, looking for an answer to the problem. If a fix cannot be found, a fatal exception error occurs and the program shuts down. The resultant error message might include a memory address or some other cryptic data that will not help the user but could be valuable for debugging. Well-written programs should not have fatal errors.
Older programming languages like C or assembly are not as transparent and do not handle errors so efficiently. Debugging programs written in these languages can test the skills and patience of the debugger.
Thankfully for the end user, commercially available software has already been debugged of major flaws. Due to this very reason, most problems encountered by the end user fall within the purview of troubleshooting and can be fixed by means previously mentioned. On those occasions that an end user does encounter a bug, going through the motions of troubleshooting can reveal a work-around until the bug is fixed by the developer.
When asking for help on a Web forum or newsgroup, be sure to do your homework ahead of time. Troubleshooting is time consuming, and people who volunteer their help appreciate someone who has made an effort to find answers. Inquiring about a problem that has been asked and answered repeatedly will not win you friends and is considered poor netiquette.
when i on my system it will take at least six minutes before it starts and i don't download software. Please, what am i to do?
Copy the exact text of the error then look for a Facebook forum where users help users, and conduct a search for that text or part of it in the forum. If you don't find any references to it, post it along with a query as to what you should do.
If I open for instance facebook and the browser gives me an error message about debugging. What am I supposed to do to solve the problem?
One of our editors will review your suggestion and make changes if warranted. Note that depending on the number of suggestions we receive, this can take anywhere from a few hours to a few days. Thank you for helping to improve wiseGEEK!