Category: 

What is Low-E Glass?

Low E-glass might be placed between two panes of glass.
Article Details
  • Written By: Holly Collins
  • Edited By: Bronwyn Harris
  • Last Modified Date: 10 July 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
The average age of a NASA engineer at the time of the Apollo missions was 28, now the average age is 47.  more...

July 29 ,  1976 :  The "Son of Sam" killed for the first time, beginning a long reign of terror on New   more...

Low-e glass is a type of treated glass that that conducts visible light while controlling the passage of heat. Low-e stands for low emissivity. This glass is an energy efficient way to control the heat being allowed in and out of a home or environment.

Heat transferred through glass is measured by the U-factor. This is the rate at which glass conducts non solar heat flowing through it. The lower the U-factor rating, the more energy efficient the glass. Low-e glass allows visible light to pass through it but blocks heat-generating ultraviolet light, requiring less artificial heating or cooling to keep a room at the desired temperature.

This glass works by reflecting heat back to its source. All objects and people give off varying forms of energy, affecting the temperature of a space. Long wave radiation energy is heat, and short wave radiation energy is visible light from the sun. The coating used to make low-e glass works to transmit short wave energy, allowing light in, while reflecting long wave energy to keep heat in the desired location.

Low-e glass comes in high, moderate and low gain panels. In especially cold climates, heat is preserved and reflected back into a house to keep it warm. This is accomplished with high solar gain panels. In especially hot climates, low solar gain panels work to reject excess heat by reflecting it back outside the space. Moderate solar gain panels are also available for areas with temperature fluctuations.

Ad

Low-e glass is glazed with an ultra-thin metallic coating. The manufacturing process applies this with either a hard coat or soft coat process. Soft coated low-e glass is more delicate and easily damaged so it is used in insulated windows where it can be in between two other pieces of glass. Hard coated versions are more durable and can be used in single paned windows. They can also be used in retrofit projects.

Generally low-e windows cost between 10 percent and 15 percent more than standard. The reduction in energy loss can be 30 percent to 50 percent. Windows made with this type of glass are a larger investment initially but will pay for themselves by reducing heating and cooling costs.

Visibility was a problem with some of the first low-e glasses, as original panes were said to have a brownish tint. Technology and manufacturing has continued to improve its quality resulting in a spectrally selective glass that allows the best possible visibility while still filtering heat.

Ad

Discuss this Article

anon267413
Post 7

On average, how long must these windows be installed to start actually saving you money?

anon224789
Post 6

Which is better E-3 or E-4?

anon139590
Post 5

Question 4: You are right. IR light is heat generating.

Question 3: Normal glass transmits 89 percent of light. Low E is around 82 percent, so quite close,

Question 2: If you apply an electric circuit measuring apparatus to the inside glass surface and it shows conduction, then it is Low e, as the Low e coating is metallic and conducts electricity.

anon126428
Post 4

The article talks about heat generating UV light. My understanding is that IR light is the heat generator, not UV light?

anon118911
Post 3

How much visible light does the low E glass block compare to standard glass? My problem - I want to use my windows to see through. Thanks

brandon
Post 2

How do I know if I already have low-E windows?

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email