Category: 

What is Heap Leaching?

Article Details
  • Written By: Paul Scott
  • Edited By: R. Halprin
  • Last Modified Date: 01 September 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
In late 19th-century London, mail was delivered to residential addresses up to twelve times each day.   more...

September 28 ,  1924 :  Two US military planes complete the first flights around the world.  more...

Heap leaching is an industrial process for extracting precious metals and minerals by dissolving them from ore with liquids known as leaching solutions. The process is commonly used to extract metals such as gold, copper, and uranium yellowcake in addition to several other minerals. Heap leaching is usually carried out in the open and on slightly sloping ground covered with a watertight plastic sheet or clay layer onto which a heap of crushed ore is placed. The heap is sprayed with the leaching solution which percolates or flows down through it and dissolving and carrying away the metals as it goes. The solution is then collected, sent to a processing plant for treatment to separate the valuable elements, reconditioned, and sent back to the heap for another cycle.

Ad

Unlike conventional ore refinement processes which utilize extremely high temperatures and highly toxic chemicals, heap leaching offers operators an effective, low cost solution with little, if any, negative environmental impact. The environmental benefits of the heap leaching process include a lack of emissions from furnaces and no need for the destructive extraction of precious natural fuel sources. There is also very little risk of environmental contamination or the poisoning of people and animals due to spills and runoff of toxic chemicals. The leaching solutions are typically dilute alkaline cyanide or sulfuric acid cocktails which, although they sound dangerous, generally pose negligible risks. Process cost are also very low by comparison, thereby making heap leaching an attractive option from a financial perspective.

The application of leaching techniques to extract metals and minerals from parent ores has been in use for centuries; the refinement of iron sulfate is one of the first examples of the process. The underlying principle of heap leaching is simple when compared to other methods. The parent ore is first crushed and then heaped onto an impermeable or waterproof surface. This is typically a sheet of plastic or a specially formed clay bed placed on a slight slope to aid in the collection of the solution. The solution is sprinkled onto the heap and allowed to slowly soak down through the ore, thereby dissolving both the target element and other minerals along the way.

Once the solution reaches the waterproof layer at the bottom of the heap, it is channeled into a collection area, or leaching pond, were it is pumped away for treatment. During the treatment process, the dissolved elements are separated and the solution is reconditioned to its original concentration before being recycled for further use. The heap leaching process is used to extract metals such as gold, copper, and nickel and may be used on low grade ores and mining tailings which are generally considered to be of no commercial value. The process also produces yellowcake, a concentrate leached from uranium ore used in the production of nuclear reactor fuel.

Ad

You might also Like

Recommended

Discuss this Article

pscott
Post 2

@anon165076: Thanks for your input.

The facts regarding radon did not appear in any of the research done for this piece. Many thanks for pointing this potential danger out.

The article is also intended to be a factual, unbiased answer to a common question, in this case "What is heap leaching?" The enforcement, or lack thereof, of mining legislation was not part of that question and not addressed in any way in the answer.

Again, thanks for the input.

anon165076
Post 1

You forgot to mention the radon and radon daughters that are constantly out-gassed into the local environment, the bacteria that constantly plague heap-leaching operations, and the fact that one bad storm can contaminate hundreds of square miles from one heap.

Only a child is naive enough to believe that the standards mining operations are supposed to follow are done - after all, the legislation we have in place can't be policed because of cronyism and nepotism in the industry, let alone any standards on heap-leaching.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email