Category: 

What Is an Air Caster?

Article Details
  • Written By: Jeremy Laukkonen
  • Edited By: Allegra J. Lingo
  • Last Modified Date: 26 November 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Contrary to popular belief, monkeys do not eat bananas in the wild because the banana is a cultivated fruit.  more...

December 6 ,  1877 :  Edison demonstrated the first sound recording.  more...

An air caster is a device that can be used to lift heavy loads in a similar manner to a hovercraft, though usually only on surfaces that are both smooth and flat. Typical air caster systems consist of several toroidal airbags and a compressor to pump them up. As they are pumped up, the airbags can create a positive seal to the ground if it is smooth enough. A thin cushion of air is eventually created between the caster device and the ground. This results in very little friction, which can allow heavy loads to be moved around without much effort.

Air casters can be integrated into various lifting devices or may exist separately. Platforms can be constructed to lift virtually any amount of weight if enough compressed air is available. Individual casters can also be placed under existing platforms, usually in sets of at least four. Additional casters may be used to lift heavier loads, though four are typically required for stability.

The main benefit associated with air casters is reduced friction. Since the load is riding on a very thin cushion of air, a substantial reduction in friction can be obtained over traditional wheeled casters. In many circumstances, a single individual can safely move a load than the many workers that would have otherwise been needed. Momentum can become a concern due to the lack of friction, so care typically must be taken when stopping very large loads.

Ad

Unlike platforms that use traditional wheeled casters or other suspension methods, air casters involve no physical contact with the ground during movement. This can result in less chance of sparking when compared to other types of casters, which may be useful when working in hazardous environments. The only part of the air caster that contacts the ground is typically the polyurethane airbag, which itself is usually lifted off the ground during operation.

Hovercraft use skirts to contain their air cushions so can be used on any surface, but air casters typically cannot function on anything resembling rough terrain. They are mainly used in warehouse and industrial environments with smooth concrete floors. It is sometimes possible to use a sheet of metal or heavy plastic to move an air caster over flooring that is not smooth, which can allow a load to be transported outside over rough, brushed concrete. If plastic sheeting is used for this purpose, it typically needs to be very thick.

Ad

You might also Like

Recommended

Discuss this Article

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email