Category: 

What Is a Twist Drill?

Article Details
  • Written By: Daniel Liden
  • Edited By: Bronwyn Harris
  • Last Modified Date: 23 August 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Due to synthetic materials and furnishings, new homes burn about five times faster than those built 30 years ago.  more...

September 25 ,  1789 :  The US Bill of Rights was adopted.  more...

The twist drill is the most widely used and widely produced kind of drill bit. The term twist drill generally refers to the kind of drill bit used, not to the drill itself. A twist drill bit is a metallic cylinder with helical grooves that spiral up the bit. Drills are used in a wide variety of projects and fields, from home repair to arts to large-scale construction projects.

The twist drill is widely used because of its low price, low maintenance, and ease of use. The bits of drills are very inexpensive, and can be thrown away when they break or wear out. There is no need to sharpen or repair them when replacing them costs far less in time, energy, and possibly money. These drills are also very easy to use, allowing most individuals to use them without any kind of special training. Most modern drills are electrical and motorized, so the user does not need to expend any more effort than that which is necessary to keep the drill straight and pointed in the right direction.

Ad

Twist drill bits are designed according to the specific purpose they are to be used for and the kind of material they will drill through. The angle of the point of the bit is especially important. Most drill bits have a 118 degree angle at their tip; this angle is suitable for drilling through most materials fairly effectively. Sharper angles around 90 degrees are often used for drilling through soft materials such as soft wood or plastic. Wider angles, often around 150 degrees, are used for drilling through tough materials such as stone and metal.

A twist drill can be made out of a wide variety of materials, depending on its purpose. Most are made out of durable high-speed steel, which can endure high temperatures without losing its hardness. For particularly heavy-duty work, diamond can be added to the normal steel of the drill bit for added durability. This is seldom done, however, because of the high cost.

Ad

You might also Like

Recommended

Discuss this Article

Vincenzo
Post 6

The diamond bits cost a little more than conventional ones, but not as much as you might think. That is because the diamonds used are the relatively inexpensive industrial ones.

The expensive diamonds are the ones that can be used with jewelry. Industrial diamonds are flawed and ugly, but tough enough to be used in things like drill bits.

Logicfest
Post 5

Here's something else about a twist drill -- they are very easy to pull in and out of things once holes are made.

No, that makes sense. Really. Let me explain.

If you are drilling a hole in a wall, you can tear up your drill bit or damage your wall if you simply pull the bit straight out. Instead of that, you can reverse the drill and the bit will back itself out of the hole. That's really the same way a screw works -- turn one way to tighten, the other way to loosen.

Honestly, I can't imagine using anything but a twist drill bit because those are easy to remove when a hole is made, the bit gets stuck, etc.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email