Category: 

What Is a Truck Winch?

Article Details
  • Written By: Dan Cavallari
  • Edited By: Bronwyn Harris
  • Last Modified Date: 25 October 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Although they mainly functioned as downspouts, gargoyles were also intended to scare people into attending church.  more...

December 3 ,  1989 :  The Cold War officially ended.  more...

A truck winch is a component usually mounted at the front of a truck, either on a reinforced bumper or on the truck's frame itself, for use in pulling the truck forward should it get stuck or pulling other vehicles that are stuck or otherwise disabled. Sometimes a truck winch is mounted at the rear of the vehicle to accomplish the same tasks, or on a truck's flatbed to help haul vehicles or other heavy items onto the bed. Most winches used in this way are motorized for greater strength and ease of use.

Off-road drivers often mount a truck winch onto the front of the vehicle for use in case the vehicle gets bogged down in mud or snow. The truck winch can also be used to help pull the vehicle across a particularly treacherous stretch of terrain. When this occurs, the cable of the winch system can be fed out, secured around a boulder or tree, and retracted, pulling the stuck vehicle forward. The cable is wrapped around a pulley wheel, which is in turn mounted to an axle. A motor can turn the pulley wheel, thereby feeding out cable or retracting it as necessary.

Ad

The user of the truck winch usually stands outside of the vehicle for better visibility of the winching process. A handheld controller is used, which is usually hardwired to the motor, though some remote control systems are available as well. The controller usually features a kill switch that will shut down the system in an emergency, as well as controls to turn the pulley in either direction, feeding out cable or retracting it. The size of the cable and the motor will dictate how much weight capacity the winch can accommodate. This will affect which winch systems will work best with trucks of various sizes.

Another type of truck winch mounts behind the driver's cab, and it is used to haul vehicles or other items into the truck bed. Wrecker tow trucks commonly use this system to haul disabled vehicles onto the bed of the truck, and the winch system is used in conjunction with a bed lift that can tilt the truck bed downward toward the ground. The wrecker will be positioned in front of the disabled vehicle, the winch hook will be secured to the frame, and then the vehicle will be hauled onto the bed of the truck as it is gradually tilted to the horizontal position.

Ad

You might also Like

Recommended

Discuss this Article

Logicfest
Post 3

Winches are becoming less common as they have been replaced in a lot of ways by a very common and inexpensive development -- dual hooks that stick out from the trucks frame. A truck with a set of those hooks and a strong chain or cable can help drag other vehicles out of trouble and can be used for all sorts of heavy duty chores.

Of course, a good set up hooks won't help much if you need to pull your own truck out of trouble. Still, those sturdy hooks are very common and most people get by just fine with them.

Terrificli
Post 2

@Soulfox -- You will still find plenty of these attached to heavily reinforced bumpers and they generally work out just fine. Bolting one to the frame may be more secure, but consider this. If you are dealing with a load that is simply too much for the truck to handle, would you rather rip off a bumper or bend your frame?

A problem with using a winch is that some people tend to overload them. When that happens, you will wind up with some vehicle damage regardless of whether the winch is attached to a frame or reinforced bumper.

Soulfox
Post 1

I have not seen one of those mounted to a reinforced bumper in a very, very long time. The reason for that is that vehicles seem to be getting heavier rather than lighter and attacking a winch directly to the frame safeguards against the very bad possibility of ripping your bumper off when the winch is under a heavy load.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email