Learn something new every day
More Info... by email
A pull cord lawn mower is one that is started by pressing a button to prime the engine, then pulling a cord to crank the motor and start it moving. The cords are often found on push-type or walk-behind mowers, and resemble a rope or piece of clothesline. Both gas and electric powered machines contain these cords. A lawn mower with a pull cord does not need to have the cord pulled again in order to shut it off.
Push mowers and walk-behind mowers are common types of pull cord lawn mowers. In order to operate a push mower, a person must exert force while he is walking. A walk-behind mower generally does not require a great deal of force in order for a person to use it, but must still be guided where it needs to go. Both of these types typically have a cord or rope along one side that must be pulled in order to start it.
A pull cord lawn mower might operate on gasoline, a mixture of gas and oil, solar energy, or electricity. Those that take gasoline or a combination of gas and oil usually have a small button on the side of the machine that must be pressed before pulling the cord. This button serves as a primer, delivering gas to the machine's carburetor.
Solar or electric powered equipment generally have a key that must be turned to an "on" position before pulling the cord. These mowers must usually be charged anywhere from four to eight hours before being used. They can normally be operated between one to two hours before needing to be plugged in again. The model, terrain, and thickness of the grass affect the amount of time they can be used before charging.
One of the advantages of a pull cord lawn mower is that it is usually inexpensive to purchase. Many people find this type of machine easy to repair and maintain as well. Repair parts can normally be found easily should they be needed.
Some of the disadvantages of a pull cord lawn mower is that the cord often gets stuck, making the lawn mower hard to start. The cord might also break or fray, and need to be replaced often. Some people have difficulty pulling the cord because there is sometimes a great deal of tension in it. Other mowers might need to have the cord pulled multiple times, which could result in the engine flooding.
Using a pull cord lawn mower didn't bother me as long as the engine was in good shape. If the spark plug got fouled or the gas was bad, however, I could wear myself out trying to start or restart the mower. The lawn mower pull cord became stuck a few times, too.
I was so happy when my dad replaced our pull cord lawn mower with one that had an electric starter. The old one still got pulled out whenever a small lawn mower was better for the job, though.
I grew up using a pull cord lawn mower, and I have to say I don't miss it at all. The one we had used a cotton pull cord, and it had a tendency to rot between summers. Whenever I took it out of the garage for the first time in the mowing season, I hoped and prayed the cord wouldn't snap. It almost always did, though, and I'd have to go to the hardware store for a lawn mower pull cord replacement. They did finally sell me some nylon pull cord, which seemed to last longer than the cotton variety.
One of our editors will review your suggestion and make changes if warranted. Note that depending on the number of suggestions we receive, this can take anywhere from a few hours to a few days. Thank you for helping to improve wiseGEEK!