Category: 

What is a Network Cable Tester?

Article Details
  • Written By: Jennifer Voight
  • Edited By: Jacob Harkins
  • Last Modified Date: 28 August 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Although Stonehenge is the most famous, there are over 1,000 ancient stone circles standing in the British Isles.   more...

September 26 ,  1960 :  The first televised US Presidential debate took place.  more...

When connected to an Ethernet cable, a network cable tester tells if the cable is capable of carrying an Ethernet signal. If the cable carries the signal, this indicates that all the circuits are closed, meaning that electric current can move unimpeded through the wires, and that there are no short circuits, or unwanted connections, in the wire. Network cable testers vary in complexity and price, but a basic tester consists of a source of electrical current, a measuring device that shows if the cable is good, and a connection between the two, usually the cable itself.

Computer networks use Ethernet cables to allow computers in the network to “talk” to each other. An Ethernet cable has eight wires that are arranged in four pairs. For current to flow correctly, the wire pairs must be connected in the proper order.

A network cable tester can identify if the wires are paired correctly. It can also show if there is a break in the insulation, a situation which allows crosstalk between two wires that should not be connected. The tester can also tell whether the cable has the proper level of resistance.

Ad

If a network isn’t working correctly, the problem is frequently user error or other problems. It will rarely be a faulty cable. A network cable tester is more frequently used to tell whether a patch cable will work before it is connected. The cabling should first be examined visually to identify any obvious problems. If everything looks correct, a network cable testing device may then be used.

A network cable tester can be a simple apparatus that merely identifies whether current flows through the cable, or it may be a professional-level, complex device that gives additional information that helps identify the problem. Professional-level network cable testers may not only tell if an open circuit exists, but may identify where the break is located. Some also identify the gauge of wire used and can generate their own signal to test for interference.

Basic network cable testers can test for simple connectivity issues but may not identify other problems that cause the cable to malfunction. Cabling may not work when it is near a source of interference or if the cable is too long. Intermittent faults may develop that do not show up when the cable is tested. Sometimes the problem is not sustained long enough to show up on the tester.

Ad

You might also Like

Recommended

Discuss this Article

anon973270
Post 5

I use cable prowler made by T3innovations. It works great when checking your cables.

GraniteChief
Post 4

Even though I don't make ethernet network cable connections very often, I do have to do it sometimes for my house and for my business. Because of this need I have found that the low and of network cable testers are actually very effective for my use. You can purchase one of these on the Internet at a relatively cheap amount. I recommend this for anyone who is planning on doing network cable installation even if it is on a small scale.

I recently had the opportunity to try a higher into network cable tester and honestly, I was not impressed. The device that costs several hundred dollars did the exact same job that I needed for a device

that I paid a mere $40 for. Not only did my device cost significantly less than the expensive professional grade device, it actually came with its creepers and connection heads for RJ-45 ethernet connections. For anyone who's ever purchased these additional accessories they will realize that actually is not a cheap purchase in the long run. The best way to buy these kind of accessories in bulk that many people will never use that many RJ-45 ethernet connections. Because it was included, I was able to save valuable money that I need to help run my household and business.
Burlap
Post 3

Often people miss the fact that there are many different types of network cable testers available on the market technicians and installers. One of the less common, but more important, kind of network cable tester is a fiber optic cable tester. These highly advanced and a very expensive testers must be absolutely accurate when making these expensive connections. Hours of special training in months of education must go into a technician that is performing fiber optic network connections. One of the highest paying jobs in network cable installation is actually the person who polishes the end of fiber optic cables. Because the glass that transmits the light signals and fiber optics must be absolutely perfect, it is extremely important that

the tests performed on these kind of connections are accurate.

For this reason you will not find fiber optic network cable testers available to most consumers. These devices cost thousands of dollars and are only usually owned by large communication companies or companies that specifically contract in fiber-optic network communication installations.

youbiKan
Post 2

@MrPolitic99, You are correct in your statement that these kinds of network cable testers are absolute time savers for installers and technicians. If you have ever tried crimping the end of a category five or another type of ethernet connection, specifically RJ-45 or RJ 11 then you will understand the frustration that can come along with making these types of connections. Inside of category five ethernet cabling are four twisted pairs of wires. This means that the wires inside of them are very small. Because of their size it is very difficult to align the proper cable pairs into the connecting head and Karen Bates with a secure connection. Often for the amateur that doesn't do this very often

, it can take several attempts to make sure that the connection is done properly.

If the amateur does not have a network cable tester this means that they must manually test the connection by using the computer which can take much longer than simple continuity tests on the cable. These devices are truly timesavers as any technician can tell you and I recommend for any amateur that they look into the cheaper models of network testers if it is something that they do more than a few times a year.

MrPolitic99
Post 1

People who were not in the information technology industry might not truly appreciate what it is that a cable tester is actually capable of. It is not that the type of device a network cable tester is so complicated to understand. But the time-saving ability that these testers have is comparable to none.

By allowing for network cable connections to be tested via a device, technicians and installers that develop and implement very complicated network systems are able to save a great deal of time and effort. Ensuring that these connections are completely stable and properly connected means that they will spend less time troubleshooting issues later in the future. This type of sure fire installations mean that you

as a consumer will have less downtime on your end.

As the author mentions, there are many different types of cable testers for network administrators and installers. The most common of these network cable testers are ethernet-based. These ethernet cable testers will often have several modes of testing the cables and connections. Because Ethernet is the most commonly used type of communication system for computers, ethernet network cable testers are the most common type of testers you will find inside of the technicians toolkit.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email