Category: 

What is a Dolby Digital&Reg; Decoder?

Article Details
  • Written By: John Lister
  • Edited By: Bronwyn Harris
  • Last Modified Date: 14 September 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Due to synthetic materials and furnishings, new homes burn about five times faster than those built 30 years ago.  more...

September 25 ,  1789 :  The US Bill of Rights was adopted.  more...

A Dolby Digital® decoder is a device which decodes signals sent in the most popular format for digital surround sound. The most common version of this format involves five individual surround channels plus a separate channel for low frequency sounds carried by a subwoofer. However, there are also several other versions of Dolby Digital®.

The most common use of a Dolby Digital® decoder is as part of a home entertainment system. In most cases, the decoder will form part of a device known as a receiver which connects to one or more audio sources and then distributes the sound to the various speakers. Most receivers will also have a radio built in, while some can also handle video signals. An alternative to a receiver is an all-in-one unit in which the decoder and audio inputs are built into the subwoofer, which then connects to the speakers. A Dolby Digital® decoder could also be built into a computer sound card.

The standard form of Dolby Digital involves carrying separate signals for left, center, right, left surround and right surround channels, plus a sub-woofer. The surround channels are often referred to as rear channels, though many audio experts suggest the relevant speakers should be placed to the side of the listener rather than behind them. Dolby Digital® is sometimes known as AC-3 or, when used in television broadcasts, ATSC A/52.

Ad

Variations on Dolby Digital® include Dolby Digital EX® and Dolby Digital Surround EX®. Both of these produce a signal for an extra speaker, which sits behind the listener. The difference is that the former artificially creates the sound for the channel by "deducing" it from the existing signal, while the latter involves the extra sound channel being specifically built into the signal in the original recording.

There are several other formats which may be covered by a Dolby Digital® decoder. Dolby Digital Live® creates surround sound "on the fly" from a video game. Dolby Digital Plus®, which requires dedicated equipment to play back, stores more information to make a better quality sound.

Most Dolby Digital® decoders will also be able to handle Dolby Pro Logic®, an older format which carries surround sound in a standard stereo signal, but only has a single surround or rear channel. A later variation on this is Dolby Pro Logic II®. This simulates full Dolby Digital® from any stereo source rather than using information which has been specifically encoded to provide a surround source. Unlike some similar simulation techniques, Dolby Pro Logic II® simply splits the original sound between the various speakers rather than artificially creating sound.

Ad

You might also Like

Recommended

Discuss this Article

Vincenzo
Post 3

@Markerrag -- that is all true unless you are dealing with music specifically mastered for surround sound. A lot of music is mastered that way and a lot of older stuff is remastered to take advantage of surround sound.

Still, I have a record player hooked up to my surround sound system and wouldn't dream of pumping my vintage vinyl through five channels plus a subwoofer. It just seems wrong somehow and doesn't sound nearly as good because the intensity of stereo is a bit lost as it is piped around to several speakers.

Markerrag
Post 2

@Logicfest -- A problem with those receivers is that they tend to interfere with music by routing it through filters set by the user. Echoes and other enhancements are common with those things.

The arguably best way to listen to music through a surround system is to shut off the surround and go to pure stereo so just the subwoofer and two satellites speakers are playing music. Turn of the effects, too, and you'll get the sound as the original producers and artists intended.

Logicfest
Post 1

That last bit is very important. If you are pumping an old CD, record or whatever through a surround sound system, the last thing you want to do is start having a digital receiver start adding to the music. Pushing stereo sound through multiple speakers is fine, but enhancing it really interferes with the music.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email