Category: 

What is a Diode Limiter?

Article Details
  • Written By: Paul Scott
  • Edited By: R. Halprin
  • Last Modified Date: 25 September 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
In late 19th-century London, mail was delivered to residential addresses up to twelve times each day.   more...

September 28 ,  1924 :  Two US military planes complete the first flights around the world.  more...

A diode limiter is an electronic circuit designed to clip or limit an alternating current (AC) supply voltage or an audio signal to a preset value. This is typically necessary where the supply voltage is larger than needed or powerful audio signals require compression to prevent overloads. Diode limiter circuits achieve this clipping function by placing one or two Zener diodes in parallel with the supply or signal. A single diode will only clip one half of the wave form while a pair of diodes will clip both negative and positive parts of the cycle. Accurate limiting is possible due to the known voltage limiting characteristics of different Zener diodes.

Any AC power supply or audio signal is made up of a sinusoidal or sine wave form. A sine wave is a smooth repetitive series of positive and negative peaks with a zero value in the center of the wave form. The height between these peaks and the zero point define the amplitude or size of the signal or supply. A diode limiter can control the amplitude of a signal if it is too large by either clipping one half of the wave or both. Producing a precise reduction in amplitude with a diode limiter is possible due to the unique, accurate voltage limiting abilities of Zener diodes.

Ad

This accurate cut-off characteristic allows a Zener diode to limit the voltage it passes at a predetermined level. If a single diode is inserted across the power supply or signal output, it will limit one half of the wave form to its rated voltage. If a second diode is inserted in the circuit in the opposite direction or bias orientation to the first, then both the negative and positive halves of the wave form will be limited. These diodes are typically accompanied by one or more resistors in the voltage limiting circuit which aid in producing a well controlled output voltage.

The diode limiter has many uses in both electronic and audio applications where it is used to produce low working voltages from a single higher supply voltage or to compress excessively powerful audio signals. Diode limiters are simple, efficient, and accurate voltage controllers which take up minimal physical space on circuit boards. These circuits are also a particularly cost effective way of controlling voltage outputs. There are also a myriad of available Zener diode ratings which gives circuit designers flexibility in the exact voltage produced by the diode limiters use in their circuits.

Ad

You might also Like

Recommended

Discuss this Article

everetra
Post 2

@SkyWhisperer - That’s definitely not something you want to try at home. I recommend you just stick with a current limiting diode to get the results you want.

They’re fairly inexpensive and they can regulate voltage over a wide range of current and voltage levels. They give you more control over what you’re trying to do.

In other words, they're not just glorified fuses, which is what your light bulb solution is. I’m with you, however. Do-it-yourself stuff should be avoided when it comes to electricity.

SkyWhisperer
Post 1

While I don’t recommend that anyone try this, I’ve heard of people rolling out their own do-it-yourself current limiter devices.

For example, one guy uses a light bulb to accomplish this. Electricity from the electrical outlet passes through the light bulb and then continues on to the target device. Any current overflow will blow out the bulb first.

Since it’s a series circuit, the current overflow pretty much ends the flow of electricity, and your target device is saved from being fried.

Like I said, I don’t recommend that you try that. The diode resister mentioned in the article seems like the more orthodox approach. But people do have their own creative solutions to deal with voltage overflow problems; I just prefer to leave creativity alone when it comes to electricity.

Post your comments

exception 'Exception' with message 'error writing captcha: Duplicate entry '2147483647' for key 'PRIMARY'' in /ssd/www/wisegeek/public_html/_core/classes/public/Captcha.php:44
Stack trace:
#0 /ssd/www/wisegeek/public_html/_core/controls/public/ControlDiscussionPostBox.php(324): Captcha->createCaptcha()
#1 /ssd/www/wisegeek/public_html/framework/classes/Control.php(104): ControlDiscussionPostBox->preRender(false)
#2 /ssd/www/wisegeek/public_html/framework/classes/Control.php(149): Control->render()
#3 /ssd/www/wisegeek/public_html/tpl/default-nocustom-lu/pages/public/article/article.htm(526): Control->__toString()
#4 /ssd/www/wisegeek/public_html/framework/classes/Control.php(300): require('/ssd/www/wisege...')
#5 /ssd/www/wisegeek/public_html/framework/classes/Control.php(309): Control->requireTpl('pages/public/ar...', Object(PageArticleCom), true)
#6 /ssd/www/wisegeek/public_html/framework/classes/Control.php(131): Control->renderTpl('pages/public/ar...', Object(PageArticleCom))
#7 /ssd/www/wisegeek/public_html/framework/classes/FormDataControl.php(87): Control->renderTemplate()
#8 /ssd/www/wisegeek/public_html/framework/classes/Control.php(109): FormDataControl->renderTemplate()
#9 /ssd/www/wisegeek/public_html/framework/classes/ScriptPage.php(50): Control->render(false)
#10 /ssd/www/wisegeek/public_html/framework/classes/Control.php(149): ScriptPage->render()
#11 /ssd/www/wisegeek/public_html/framework/classes/Page.php(97): Control->__toString()
#12 /ssd/www/wisegeek/public_html/_core/classes/public/PublicFrontController.php(443): Page->processRequest()
#13 /ssd/www/wisegeek/public_html/_core/classes/public/PublicFrontController.php(7): PublicFrontController->renderPage()
#14 /ssd/www/wisegeek/public_html/index.php(11): PublicFrontController::run()
#15 {main}