Category: 

What Is a Blind Flange?

Article Details
  • Written By: Lori Kilchermann
  • Edited By: Jacob Harkins
  • Last Modified Date: 12 August 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
A chameleon’s tongue is 1.5 times the length of its body.  more...

September 1 ,  1939 :  The Nazis invaded Poland, starting World War II.  more...

A blind flange is a solid disk used to block off a pipeline or to create a stop. It is machined in the same manner as a regular flange with the mounting holes around the perimeter and the gasket sealing rings machined into the mating surface. The difference is that a blind flange has no opening to allow fluid to pass through. The blind flange can be inserted between two open flanges and used to block off the flow of liquid through a pipeline.

Often a blind flange is inserted into a pipeline when a repair is required further up the line. This allows the flanges down stream to be disconnected without fear of losing liquid. Many times this type of blockade is used when adding another line onto an existing pipeline or when a new valve is being added. This blockade is also used to shut down a line when it is no longer needed.

Without the blind flange it would be difficult to perform maintenance or repairs on a pipeline. The flow would need to be shut off at the nearest valve, which could be miles away from the repair area. Valves are also very expensive and are prone to sticking. The blind flange is a much more cost efficient way of sealing a pipe.

Ad

When a pipeline is being constructed, a blind flange is often incorporated into the final length of pipe. This design allows for expansion or continuation of the pipeline by simply adding onto the final flange. This holds true for the addition of tees in the pipeline as well. A tee can be installed and then blocked in order to leave the option of running a pipe at a later date.

The use of flanged pipe has allowed pipelines to be built in a much faster manner than traditional welded seam pipelines. Moreover, it has made the task of repair and sectional replacement a simpler job. Sections of pipe can now be assembled anywhere in the world and shipped to the job site. Once there, they can simply be bolted into place and the pipeline can resume transportation of its liquid cargo.

By utilizing a universal design, any pipe flange in the world can be used in any pipeline as long as the proper diameter is selected. This allows emergency repairs with locally manufactured pieces and eliminates the need to have special parts shipped all over the world.

Ad

Discuss this Article

m3g4n
Post 4

@omgnotagain – I apprentice with my dad’s plumbing company and we use PVC blind flanges sometimes. They’re a lot sturdier than you’d think. They’re made to handle up to 150 psi and higher.

There are also cast iron, aluminum, and steel blind flanges.

omgnotagain
Post 3

What is a blind flange usually made of? Can they be made of PVC or plastic? I’m curious because it doesn’t seem like PVC would handle the pressure well.

Animalz
Post 2

@qwertyq – They could do it that way, or just install a spectacle blind flange (also called a figure-8 flange) at some point. It’s a blind flange that’s shaped like a pair of spectacles and is usually installed between two pipe flanges, just like a regular blind flange. It’s composed of two sections, joined in the middle by a piece of metal.

One section has an opening that lets water through during normal operation. The other end is solid and blocks flow during maintenance. They’re usually installed permanently, making it easier to perform pipe repairs.

qwertyq
Post 1

I always wondered how people did maintenance on water mains and stuff like that and now I know! But, since blind flanges completely stop the flow of liquid, does the maintenance crew have to install one every time they need to repair a pipe, then uninstall it after the repairs are done? That doesn’t sound very efficient.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email