Learn something new every day
More Info... by email
A batch oven is a thermal treatment device used in a variety industrial processes to achieve process specific heating of materials or components. These processes include the pre-heating of various components prior to the application of coatings or finishes. Curing, drying, and out-gassing of finished products are also achieved using a batch oven. Low-temperature stress relief of parts produced with high-heat machining processes may also be done in batch ovens, as can the baking of coated components. Batch ovens are available in a wide selection of sizes, process specific features, and heating power sources.
Many manufacturing processes require materials or parts to be heated to specific temperatures under specific conditions either prior to, during, or after production. The batch oven is one of the more common devices used to achieve these thermal treatments. So named due to the fact that parts or materials are typically treated in batches, these ovens are all designed to produce very specific heating conditions to meet the unique demands of the processes in question. Most include sophisticated control units that allow operators to monitor and adjust internal conditions such as temperature, airflow, and vacuum levels.
Some of the processes for which the batch oven is used are preparatory measures used to pre-heat components or materials before they are sent to other parts of the production line. The pre-heating of medium-density fiberboards and other substrate materials prior to coating is a good example of this type of process. In most cases, though, batch ovens are used for mid- or post-production functions, such as the curing of resin-based composites or the burn-in of electronic components. This type of batch oven circulates the hot air without causing excessive turbulence or, in some cases, imparts a partial vacuum inside the oven interior.
Low temperature stress relief of parts manufactured using high-heat processes is a critical batch oven function. This process prevents tempering caused by heat extremes during manufacture from causing crystalline flaws and cracks in parts. Batch ovens are also used for conventional drying of washed parts prior to coating or other moisture-sensitive processes. Out-gassing is a batch oven function where parts that have absorbed gases during manufacture are heated to release the trapped gas. Powder and wet coatings are also frequently baked in batch ovens to harden the finishes.
Batch ovens are available in a wide range of sizes and capacities and may include a selection of process-specific features such as vacuum and specialized air circulation systems. Smaller, benchtop-type ovens may have internal volumes of 8 cubic feet (0.23 cubic meters) or less, while the heavyweights are often big enough to drive a forklift into. Most ovens are electrically-heated or fired by direct and indirect gas burners.
One of our editors will review your suggestion and make changes if warranted. Note that depending on the number of suggestions we receive, this can take anywhere from a few hours to a few days. Thank you for helping to improve wiseGEEK!