Learn something new every day
More Info... by email
The first and most important tip for powder coating at home is to research how to properly powder coat and take the necessary precautions to make sure the process is done safely and effectively. One should be sure to have all the proper tools on hand before beginning the process; powder coating at home can be difficult, especially for larger pieces, as the curing process will require a hot oven that can hold a consistent temperature. Other powder coating-specific tools are also necessary, so if the person doing the powder coating at home does not have access to these tools, he or she may want to consider visiting a professional powder coater or finding a place that rents the necessary equipment.
If the person doing the powder coating at home is new to the process, he or she may want to consider trying out the process on scrap pieces of metal. This will allow the person to make mistakes without affecting the final product he or she intends to powder coat. It also allows the person to become familiar with all of the tools as well as the overall process. Ventilation is essential, so the powder coating process should be done in a location with adequate ventilation. The person should also wear proper safety equipment, including safety glasses or goggles, a ventilator mask, gloves, and a smock or other protective clothing if possible.
It is important to have a functional oven that will fit the parts the person intends to powder coat, and the oven must be able to hold a fairly consistent temperature. When powder coating at home, do not use an oven that would normally be used for the cooking of food, as the powder coating process will release some toxic fumes that can linger in the oven after the powder coating process is complete. For smaller parts, a toaster oven or small oven will suffice, but for larger pieces, an industrial oven or an oven specifically designed for powder coating may be necessary.
The person powder coating at home should be sure to set up an efficient system before starting; this will involve setting up tarps to contain spent powder coating materials, ventilating the area, cleaning and masking the parts to be powder coated, preheating the oven, and finding a way to hang the parts for drying. Proper planning ahead of time will make the process much easier and prevent mistakes.
One of our editors will review your suggestion and make changes if warranted. Note that depending on the number of suggestions we receive, this can take anywhere from a few hours to a few days. Thank you for helping to improve wiseGEEK!