Learn something new every day
More Info... by email
When cleaning pavers, they can often be swept with a broom to remove dirt and debris. They can also be sprayed with a garden hose or pressure washer from time to time in order to clean them more thoroughly. Any areas that are stained or have mold or mildew can be scrubbed with a solution of mild detergent or bleach and water. After this scouring, the blocks can be rinsed again to remove any soapy residue.
Many times, maintaining pavers requires only that they be swept to remove leaves, dirt, or twigs from a walkway or patio. This can be done with a household straw or push broom. In the event there is a thick layer of debris on these stones, a leaf blower could be needed to get rid of this loose material.
One of the easiest methods of cleaning pavers is to use a garden hose with a spray nozzle to rinse off the blocks. This is normally done once or twice a year, or as needed. This technique usually rids the stones of heavy dirt or grime rather easily. The blocks can normally be allowed to air dry after doing so.
In the event there is thick mud on the pavers, a person might need to use a pressure washer in order to remove it. This should be done carefully, so as not to chip any of the block or mortar away. A homeowner could use only water or a solution of mild detergent for cleaning pavers with this equipment.
Mild detergent may also be used in the event there are stains that need to be removed. It can be administered with a scrub brush or steel wool. A person could also use a solution of one part bleach to four parts water on areas that show signs of mold or mildew. This could be applied with a stiff brush, then rinsed away with clear water.
If anything but water is used for cleaning pavers, the blocks should then be rinsed with clear water in order to remove any residue that might be left behind. This can usually be done by spraying the area with a garden hose. In some cases, the area might need to be mopped with a string-type mop, or have the water removed with a squeegee.
Cleaning pavers is normally very simple and easy to do. It usually does not take a long time or require the purchase of special cleaning products. Keeping stones clean can help keep them looking good, no matter what they are being used for.
One of our editors will review your suggestion and make changes if warranted. Note that depending on the number of suggestions we receive, this can take anywhere from a few hours to a few days. Thank you for helping to improve wiseGEEK!