Category: 

What are Rock Hammers?

Article Details
  • Written By: Dan Cavallari
  • Edited By: Bronwyn Harris
  • Last Modified Date: 20 November 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
The Argentinian resort town of Epecuén was submerged by flooding for years; it is now populated by one elderly man.  more...

December 5 ,  1933 :  Prohibition ended in the US.  more...

Because geologists search for fossils and artifacts in a variety of landscapes, they often need quality tools to pick away dirt, clay, rock, and other substances. Rock hammers are such tools. Also known as geologist hammers, rock picks or prospector's picks, rock hammers are tools with a flat head on one side--perfect for delivering a hard blow to solid surfaces--and a pick on the other side, which can be used for picking away at softer materials or debris that has been loosened from the flat head side. Geologists determine which side to use based on the type of rock they will be working with.

Rock hammers come in a variety of sizes and weights, and their quality is generally determined by the weight and construction. Rock hammers are typically forged from solid hardened steel, and the weight of the head determines the balance and effectiveness of the entire hammer. Professional geologists typically prefer heavier rock hammers so that they may use the tool consistently without quickly breaking it. Heavier rock hammers also allow the geologist to break and pick harder rock substances. Lighter rock hammers are perfectly fine for children or amateur geologists, and they can be less cost-prohibitive than heavier, professional models.

Ad

Rock hammers may also come with a chisel head, which is good for clearing debris or brush away from rocks and fossils. With any of the variety of rock hammers, a steady hand and careful processes are essential to successful geological exploration. You must be extremely careful with rock hammers, not only for your own safety and the safety of others, but also for the safety of the artifact being explored. Because rock hammers are heavy, powerful tools, the potential for damage to an exposed fossil or artifact is quite high; professional geologists will spend much time with their rock hammers to get acquainted with the weight and balance of the tool, thereby reducing the risk of damaging their work or injuring themselves and others.

Be sure to wear eye protection when using rock hammers. Because they are made of hardened steel, rock hammers will send off rock chips when they strike rocks, and the hard chips can strike the user's eyes without protection. Never hit a rock hammer with another hammer like a chisel; chisels are made of softer metals and are made specifically for such a task, whereas rock hammers are made of less pliable materials that are likely to shoot off dangerous rock chips.

Ad

You might also Like

Recommended

Discuss this Article

Oceana
Post 6

Does anyone know if you need a special type of goggles for using a rock hammer? I got one for Christmas, and I'm ready to try it out. All I have on hand are a cheap pair of wraparound shades.

I'm sure that these would be better than nothing. I just wonder if the rock chips would be strong enough to break through the shades. That would be terrible!

My dad has some goggles that he wears while welding. I wonder if maybe I need something like this instead.

I know that my rock hammer will definitely be sending pieces of rock flying up at me. I just want to make sure that I have adequate protection before going on an excavation trip.

StarJo
Post 5

I love searching for crystals and precious stones within beds of rock. I have a rock hammer with a pick to make it easier.

Often, I will find big, beautiful clusters of amethyst or quartz embedded tightly in a big piece of rock. I use the flat side of the hammer to bust the surrounding material up, and I use the pick to delicately flick it away from the crystals.

I am amassing a good collection of beautiful crystals. This is all because of my rock hammer. Without it, I would have had to bring home the unattractive chunk of rock along with the precious material.

cloudel
Post 4

@wavy58 – It's always fun to go excavating with a rock hammer. Like your friends, I use the chisel kind, because my main focus is digging out artifacts.

I have found many different arrowheads that have been fossilized. I often have to pull somewhat soft rock away from the arrowheads, and the rock hammer is so helpful for this task.

I remember back before I got a hammer. I was out in the woods with nothing but a stick, and this made the process so tedious. I couldn't get much of the debris removed, so I decided to invest in a rock hammer.

I'm glad that I did. I realized that excavating artifacts was something I wanted to make a lifetime hobby, so I needed the proper tool to make it more enjoyable.

wavy58
Post 3

I live in the South, and I have a couple of friends who like to go hunting for fossils. They use chisel edge rock hammers, because these are the best kind for digging in soft shale and limestone, which we have plenty of around here.

They often go to dried up stream beds or areas that have been excavated for constructing highways. They use their rock hammers to split the rock apart and find fossils inside of it.

They have brought home many fossilized trilobites and seashells. Though some of the fossils remain embedded in the chunks of rock they bring home, they have been able to free up others with their hammers. They have given me a few petrified seashells that look like the seashells of today.

truman12
Post 2

My grandfather worked in a quarry and he has told me lots of stories about what back breaking labor he had to do. Apparently most of his time was spent using massive old stone tools to break bigger rocks into smaller rocks. Apparently the hammer he used was about the size of a sledge hammer but with a bigger head.

Later in his career they transitioned to hydraulic rock hammers because they worked better and took less of a human toll. But for a long time it was nothing but my grandfather's back and his rock hammer smashing stuff up all day long.

Ivan83
Post 1

I have a job through the state of Wisconsin excavating potential sites for new highway construction. Myself and several archaeologists and anthropologists are called in to examine any new site for potentially relevant artifacts.

We end up using rock hammers just about every day. Our examinations are not as thorough as they could be, if that was the case new roads would never get built, but we take a pretty close look and end up breaking up a lot of rocks and hard soil. I actually have a tool belt that contains all of the most useful excavating tools and a rock hammer is always a part of it.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email