Learn something new every day
More Info... by email
Kandahar ski bindings are cable bindings. They secure the foot in a forward position in the binding using a cable. Cable bindings are not interchangeable with three-pin binding systems.
The New Nordic Norm (NNN) telemark ski bindings are available in both cable and three-pin styles. Three-pin style has three pins off the base with a metal clamp to attach the boot. The pins must be firmly placed into the holes on the toe of the boot. Cable bindings can be more expensive than three-pin, but are less likely to damage ski boots than pin types.
The New Nordic Norm Backcountry (NNN-BC) ski bindings are not interchangeable with NNN bindings. NNN and NNN-BC bindings are compatible with different ski boots. Some skiers consider the NNN-BC type more comfortable than the NNN systems due to the placement of the fastening hardware under the toe area rather than in front of the toe of the ski boot.
NNN-BC ski bindings are used with some telemark boots to give a lighter weight skiing system. The material of the ski boot can make a difference to the bindings. Some skiers recommend plastic boots for controlling turns, while other skiers say some plastic ski boots are heavy and less comfortable than leather or NNN-BC boots. Telemarking on sloped terrain often requires a stiffer ski boot, while backcountry skiing may require a lighter ski boot.
Alpine touring ski bindings are designed to fit the heel in a unique way: when climbing, the heel is free. This type of binding lifts the heel to keep it free while the toe area stays level while climbing. When skiing, both the heel and the toe are clamped as in alpine downhill ski bindings. Alpine touring boots, which feature a plastic shell, rigid sole, and removable inner lining, are used only with alpine touring bindings. Most of these bindings are pressure sensitive and designed to release when the weight of a falling skier makes contact with them.
Snowboard bindings are usually available in small, medium, and large. Different types have different shaped heel holders and base plates. Most snowboarders buy the snowboard first, then find the bindings that fit.
Does anyone know which kind of ski bindings would be best for a beginner skier?
I am still tackling the bunny hill and find that when falling the current bindings I have tend to get stuck, so I don't always lose the skis as I should. I really need something more pressure sensitive, so that if I am rolling down a hill I don't end up poking myself in unmentionable places with a ski that should have been released.
I am willing to buy my own skis for this venture as I find the rental ones to be very sticky upon their release. This always ends up with me getting more bruises.
If you are going to try snowboarding and are looking to buy a board, it is a good idea to just choose one that you like and worry about the bindings later.
Snowboard bindings are meant to be purchased separately due to the way they are sized, so you can have a bit more freedom when choosing the actual board.
If you go to a local snowboarding shop you can work with a sales clerk to help you pick a perfect board then go over the bindings with you. Remember, you want the bindings a little snug, but not painfully so. The staff should be able to help you choose the perfect fit.
One of our editors will review your suggestion and make changes if warranted. Note that depending on the number of suggestions we receive, this can take anywhere from a few hours to a few days. Thank you for helping to improve wiseGEEK!