Greenhouse glass traps heat energy in the same way that our planet’s atmosphere keeps us warm – through light wave transformation, and through convection of the air inside the greenhouse. Solar radiation reaches the greenhouse, passes through the glass, and gets absorbed by the ground and plants inside the greenhouse. The ground and plants transform the solar energy, and convert it to heat energy, which cannot escape through the glass. The air inside the greenhouse is kept warm by convection, which simply means that warmer air near the ground rises, and the cooler air near the ceiling of the greenhouse falls. Because the greenhouse glass keeps the air trapped inside, the convection process allows the air to absorb more and more heat each time it rises and falls.

The sun provides three basic types of light waves: UV or ultraviolet waves, visible light waves, and infrared light waves. Each of these light waves has a relatively short wavelength, and will pass easily through most types of glass, including greenhouse glass. Once inside the greenhouse, the waves are absorbed by plants and the ground, where they are transformed into thermal, or heat energy. Because thermal energy has a much longer wavelength than light waves, it cannot pass through the glass, and remains trapped inside. This is referred to as the Greenhouse Effect; it is the same process that keeps the Earth warm, and makes the inside of your car hot on a sunny day.

Along with light wave transformation, another process called convection helps maintain the warmth inside a greenhouse. The air closest to the ground and plants is warmed by the radiating thermal energy; since warm air is lighter than cool air, it naturally rises. In our atmosphere, the warm air will eventually reach a height where it will be cooled again. However, the glass in the greenhouse traps the air before it can reach this height and cool completely. As the air continuously rises and falls within the greenhouse, it maintains its heat and gets slightly warmer each time.

The term “greenhouse glass” commonly refers to both true glass as well as polycarbonate plastics that are also used to construct greenhouses. Glass and clear plastic function in basically the same way, by allowing light to pass through, but trapping heat inside. The choice of whether to use glass or plastic will depend on the type of structure being built, the amount of money available for the project, and the length of time the structure is expected to last. Plastics are generally lighter weight and less expensive, but not as durable to weather and age. Glass greenhouses tend to be semi-permanent structures that will cost more to build initially, but will hold up better over time.

The main difference between greenhouse glass and regular glass is the type of coating, or glazing, applied to it. Greenhouse glass is typically tempered for safety. This means that it has been laminated, similar to a car windshield; if it breaks, it crumbles into small pieces with relatively smooth edges that are less likely to cut your skin than large, jagged shards. Tempered glass is highly recommended for greenhouse applications, since the glass will be installed overhead and subjected to wind, hail, and stress from snow weight in colder climates.

In addition, greenhouse glass may have a low-E glazing applied. Low-E glazing is a thin, semi-transparent layer of metal that reflects most UV and some infrared light back into the atmosphere, while still allowing visible light to penetrate into the greenhouse. By blocking the more intense UV waves, low-E glass can protect tender seedlings from receiving too much solar radiation. Low-E glass also helps to maintain a more constant temperature within the greenhouse by blocking some incoming infrared, or heat waves. With proper ventilation, low-E glass can help prevent the greenhouse from getting overheated.