Category: 

How Does an Electrical Outlet Work?

Standard U.S. power outlet.
Circuit breakers.
220 volt europlug for outlets in European countries.
A 230 volt plug for outlets in the UK.
Electrical outlets are used to power appliances like microwaves.
Article Details
  • Written By: D Frank
  • Edited By: L. S. Wynn
  • Last Modified Date: 20 September 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Dolphins have the most teeth of any mammal, sometimes over 260, yet they almost never chew their food.  more...

October 20 ,  1973 :  The "Saturday Night Massacre"  more...

In every home, office building, and manufacturing plant, standard electrical outlets can be found. These outlets, also known as receptacles or plugs, serve to provide ready-to-use electricity for all who need it. These outlets serve to supply power to such everyday items as lamps, vacuum cleaners, toasters, microwaves, radios, TVs, and stereo equipment.

While the outlet supplies electricity and is readily visible to the eye, there is much going on behind the scenes, or walls in this case, to get that electricity to the outlet. Electrical wiring travels from the electrical panel to the outlet, with possible stops at other outlets or lighting devices along the way. For an outlet to function, the hot wire (usually a black or blue wire) will leave the panel and bring the power to the outlet, while a second wire, the neutral wire (usually a white wire) returns the power from the outlet to the electrical panel. In effect, the power is brought to the electrical device (an outlet in this case) and then circles back to the panel. This is how the term electrical "circuit" came into being. A third wire is sometimes present. This wire (typically green in color) serves as a grounding wire.

Ad

Many municipalities have electrical codes mandating that electrical wiring be housed in pipe. This is by far the safest way to route electrical wiring and insure a proper grounding. Other forms of housing for electrical wiring are BX (a flexible, aluminum coil) and romex (a rubberized insulator).

In many older homes, two prong outlets are the norm. Modern houses contain three prong outlets, allowing the hot, neutral and ground all to be brought to the outlet. In washrooms, near kitchen sinks and in garages, you may find GFI receptacles. GFI stands for ground fault interrupter. These outlets, now required in many states, are extremely sensitive and are installed, or should be installed, wherever water is in close proximity. An outlet like this can save lives as it will trip (turn off) much like a circuit breaker, if it detects more power coming into the hot wire than in leaving through the neutral wire.

For instance, if a radio fell into the bathtub while you were bathing, you would be in for a bit of trouble to say the least. With a standard two or three prong receptacle, the power would continue to pass through the water and you. In all likelihood, you would be electrocuted. If, however, that radio was plugged into a GFI receptacle, the receptacle would sense the lack of electricity returning to pass through the neutral (since it was passing through you instead) and trip, thus killing the power to the radio and potentially saving your life.

Ad

More from Wisegeek

You might also Like

Discuss this Article

anon140212
Post 4

what are some codes someone must follow in the fields of electrical engineering?

anon85321
Post 2

Yes, if it is within six feet it must be GFCI protected.

chdrake
Post 1

Is there a regulation regarding the proximity of a 110 volt AC plug outlet to a source of water such as a faucet in an industrial plant?

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email