Category: 

How Do I Run a Webcam on Linux?

Article Details
  • Written By: L.S. Ware
  • Edited By: Melissa Wiley
  • Last Modified Date: 05 September 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
People tend to blink less frequently when they are lying; they blink faster than normal after the lie.  more...

September 24 ,  1996 :  Major nuclear powers around the world signed the Comprehensive Nuclear-Test-Ban Treaty.  more...

The setup, configuration, and running of a webcam on Linux can be a reasonably simple process or a rather complicated procedure. There are a number of steps to take to assist with a smooth installation, and each webcam and computer setup will have its own quirks and potential issues. Put into the most simplistic form, there are three primary steps for running a webcam on Linux. First, determine if the webcam is detected upon connection and its exact name as recognized by the computer. Second, install the drivers that are required to run the webcam. Third, install and configure any additional software needed or desired for webcam functionality. If the webcam is USB video class (UVC) compliant, the process may be this easy.

First and foremost, it is imperative to ensure that root privileges are granted before attempting to establish a webcam on Linux. To find out the name of an attached USB camera, use "lsusb" to list all recognized USB devices. Next comes the often complicated task of finding, compiling, and installing the drivers. Drivers are typically available within the kernel, as a loadable or compilable module, or as a packaged binary driver.

Ad

To determine whether the needed driver is already enabled in the kernel, use "dmesg" to list what has been loaded upon booting. If the driver is not listed here but the module name is known, the "find" command can be utilized to search for a loadable module. Should the driver not be in the kernel and the name be unknown, it is possible to get a list of all available modules by running "ls -R /lib/module/'uname -r'/kernel", where "uname" is replaced by the computer's kernel version.

Once the module name is determined, running the "lsmod" command will list all loaded modules. With luck, the driver module will be loaded, but if not, use "modprobe" to attempt manual loading. In some cases, none of the above is successful, and a kernel patch or a recompiled kernel is needed to run the webcam on Linux. The camera manufacturer's website may have additional information and documentation to assist with driver installation.

Depending on the computer setup, camera, and software version, it may be necessary to enable the video devices node in order to access the webcam on Linux. Use the "MAKEDEV" script if the video device node does not already exist. Search the devices either via a file manager or check what loads at boot up to verify if it is already there or if it needs to be created.

Now that the driver is installed and the video device node is established, it is time to install and configure any software required or desired. A number of programs exist to facilitate running a webcam on Linux. There are various framegrabber or image-capture programs available that can be installed and operated from the command line. Graphical user interface (GUI) programs can also be employed that allow for additional functionality, such as video conferencing.

Ad

You might also Like

Recommended

Discuss this Article

Logicfest
Post 2

@Soulfox -- while it is very true that Linux has improved over the years, things are not always "plug and play" and that means you might have to follow the steps set out in this article if you install a Webcam that your Linux distro doesn't recognize.

Still, that fact should not scare anyone away from Linux. Not every peripheral works well with every operating system and tweaking even the most popular operating system on the plant is necessary from time to time to get some hardware to work.

Soulfox
Post 1

Luckily, it is very possible to simply plug in a Webcam and the Linux OS will pull up the correct driver automatically. It used to be very complicated to install such things as Web cams, but Linux distributors over the years have tackled that problem quite well.

One of the criticisms of Linux over the years is that it is difficult to set up and use. That may still be true for some things, but Linux distributors have spent a lot of time and money trying to make that criticism a thing of the past.

I know how things have improved from experience. I well remember how difficult it was to install Linux and have it recognize peripherals

such as Web cams at the turn of the century. I installed a Linux distro on my laptop a couple of years ago and was amazed that drivers for everything were built in to the operating system. And, yes, that included a driver for my built in Webcam. Linux has improved over the years.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email